HOW TO REMOVE WEBSEARCH.HOMESEARCH ON MOZILLA

 I thank the previous companions firefox users who have given a tutorial on the error in firefox.
which I think is very disturbing my comfort in using firefox. Because before I was downloading a program but I can websearch.homesearch.info that I think is very annoying because every time we create a new tab he would always show up and it's very annoying for me. Because he had such control of my freedom in determining search engine which is good for me.
The way is as follows:
 
1. Go to Firefox> Help> Troubleshooting Information. 
2.Click the "Reset Firefox" button.
3. Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
4.Firefox will open with all the factory defaults applied.

From the results I've managed to try the 100% websearach disappeared completely. Because firefox has reset the program. Thx for coming ..

Read More

How to repair a wall paint that is exposed to rain

In this opportunity I will teach you techniques to make your walls and asbestos have become dull besinar. The cause of the wall become faded, chipped, and even become yellowish like rust caused by rains and leave stains on the wall. This will be easier if you have experience in the field of painting and coloring. The materials required is quite easy and can be found in stores near the paint.
Both the tools needed are:
 1. Brush 2 pieces
 

2. paint wood

3. paint the walls




 

 4. Tinner

 

5. water

Note: the color of the paint wood and oil must be the same
 
The thing to do is as follows:


1. Clean the surface of the wall that we will fix the paint from dust and dirt as much as possible by using a broom or cloth.

 

2. Combine Tinner we've provided earlier into paint wood. Evenly so that the result should be thinner given fifth of the existing paint. Examples given 1 liter to 0.2 liters of oil paint thinner. So that the results simply mixing evenly stirred up paint and paint thinner look together and no longer lumpy.

 

3. Once mixed paint wood please your wall paint surface has been cleaned earlier. Suggestions for paint looking evenly so the results look good. Let dry for a few moments.

4. If the paint wood begins to dry you please take the wall paint that has been provided earlier. Mix with water that has been provided. Proportion is almost the same as the earlier wooden paint fifth. Paint stir until evenly distributed.


5. Then paint the wall surfaces previously coated wood paint. Make evenly as possible.



6. Allow the paint to dry and see the results of the paint. Woooww!! Gone was the impression of dull and dirty on the walls of our homes.

Good luck my friends.

Read More

KNOWING HOW TO DAMAGE IN COMPUTER

To know all the symptoms that exist on your computer is to use our senses.
The symptoms are caused.:
1. when installing faulty memory, a good motherboard will give a warning sound signal installation guidelines that was not true. Check and insert it correctly
2. AGP VGA Card Installation or less tight fit or not. Motherboard back in good shape gives a warning signal sounds, check and insert it correctly
3. Disk Data cabling for the best or not just right and setting the position of master or slave hard drive that does not fit. Correct and check the jumper positions Disk for master / slave and check with autodect Disk in the BIOS.
4. Data Cabling Disk Drives that do not fit or reversed. please fix that re-
5. Installation of improper connector panel so that the indicator lights for Power On Disk and inactive.

Read More

How to drill CURTAIN OF GOOD AND TRUE

How to drill curtain RIGHT

Well here I will publish my experience in drilling curtain that rarely people know. Because people sometimes underestimate this kind of work.
As for the tools needed to do the drilling are:

a. A drill for the wall type of drill that I recommend is the type of bosch.

b. Drill bits for concrete that has eyes the size of five that I recommend.

c.Fiser with bolts that fit the size fiser F5 and worm screw size 5.

d. Screwdriver, pliers and a hammer if needed.
e. A gauge length of 5 meters

Well we will start to put up curtains properly in my experience.
1. First we measure the height of the curtain that we will attach a standard size that I usually have a high tide of 2.5 meters and width depending on the width nakonya.
  nako one standard size: 1 meter
  nako two standard sizes: 1.5 meters
  nako three standard sizes: 2 meters
  for 4 nako usually size 2.5
2. After we measured from the high mark fabric over 10 cm of the size of the fabric on the walls will we put the curtains earlier. The goal that was not too dragged when we plug that would later lead to the bottom of the cloth becomes dirty easily.
3. after we put a pair disilahkan drill we've provided before start of the drill bit mounted securely so that the drill can not be separated from the asat drill. Provide fiser and bolts that we do not inconvenience when drilling walls.
4. Attach the drill bit that has been fitted with drill ketanda we have made earlier.
5. valve drill press to rotate in accordance with our wishes. Press the drill earlier in accordance with the size of our fiser earlier. do not be too deep

Read More

How To Get Private Data

Good evening gentlemen Komputer Handal.
One spy program again I have is a USB Spy Program V 1.3. Mr.paradoks. If when you have a laptop or public computer and have your friend often borrowed and even feels that he has. In fact, she often uses flasdisknya without your permission. And could-be data entered by your friend it is a very important and personal data. Please use this program. Who knows you get didalamny content should be interesting and privacy. Because this program is used to copy any type of data stored via USB Flash into the computer machine:

Its use is very simple:
1. Please Check the Autosave button - to create their own program running the command
2. Please click the button hide me - serves to hide the program so as not to appear
3. Please press the Shift + Alt + S - to bring the program back.




DOWNLOAD: DISINI USB SPY

Read More

How Service Damaged Adaptor

HOW SERVICE DAMAGED ADAPTOR

oke this time i will give technician for how service damage adaptor.
This is one of the important brain ware of a laptop. If there is no adapter, the laptop will not be used, because there is no source of electric current flowed in laptop.Dan adapter is not free from problems, one of which is berkefip-kedipnya indicator LED lights when the adapter will be used to recharge the dilaptop we.

If there experienced anything like the above would be nice not to use the laptop and the adapter. Him because we have not actually matter whether the laptop or the adapter.

The problem that will arise from the use of continuously will result in something like this:

• The possibility of your battery directly hack

• Fires on both components of the mainboard and adapter and make the computer turns off completely.

Note : flashing lights that indicate a component part of the burned on your latop..

What can you do if you see flashing laptop adapter this case?

• If the adapter and your laptop is still in a state of national warranty, please feel free to bring a flashlight computer.
• If the warranty is no longer valid, please go to the nearest service handyman.
• And if only the adapter is damaged, not his laptop, please you buy a new one.

Let us fix it together:

• Try another adaaptor laptop with a brand. Could borrow from relatives who have the same company. If the adapter when the try is flashing or not lit at all, or the indicator light on the laptop which is usually blue to another color. Then certainly there is a short circuit in your laptop.
• Then try your laptop adapter on another laptop the same or compatible (one brand, look and amperenya voltage). If the adapter is still blinking, then the adapter is you seem troubled.
• Use multitester for measuring current and voltage adapter if your laptop is still normal according to the voltage and current marked on the label laptop adapter. This is usually done by a laptop technician to determine whether the adapter or laptop mainboard are broken.

The continuation of laptop adapter problem flashing it in service?

We actually do not recommend in servicing its own adapter. Because the adapter itself resilience Just serviced ranged from 1 month and that a further breakdown of this adapter is your mainboard. It would be wise if we buy a new one or use its products no.2.

Will it still be repaired if damaged laptop mainboard?

So to make sure what it is mainboard is defective, then we need to do testing on the port adapter and DC board in our laptop mainboard. The possibility of a common if not part adapter, can also be a problem like this:

• Boardnya DC connector or adapter port on your laptop mainboard solder fractured in its result often in pairs and removed with no caution.
• Strip mainboard there is a short-circuit. If mainboardnya to burn, then the percentage of successful repair will depend on the extent of damage, availability of spare parts, and reliability engineers working on.

Okay so all of my friends about the problem adapter blinking. May be useful for you.

Read More

HOW TO BE A RELIABLE COMPUTER TECHNICIAN

LEARNING TO BE A GOOD COMPUTER TECHNICIAN AND TRUE

                 CHOOSING THE MAIN COMPONENTS
  1. CASING (AGENCY)

Casing is an important component to support the performance of a computer. The sections are:

a. Power Supply (power supplier). In this section we have to be extra careful. For, if the power supply to the inside of the casing is not good and if it is not very convincing at first glance, should not have been. Select the amount of voltage that can be supplied by the casing, for example 250 watts, 280 watts, 300 watts, or more as needed.

b. Bay and Port for Add-on Card. Notice how many bays alias column attached. Whether it's for a CD-ROM drive, DVD-ROM drive, and floppy enough drive.Selain bay, port for add-on card that is behind casing must also be considered.

c. Ventilation systems. Note the vent hole. Its nice that it has a sufficient air gap, well behind, above, disamping.2

. processor

The processor is a component of the fastest growing PC. Problems arise because the processor then confused, which processor is deemed most appropriate to the needs and the times.

a. Intel Celeron

In terms of technology, the processor is not particularly new. Front Side Bus is used for example is an ad that kept the speed of 66MHz (early version). Although it has a relatively small caches, Celeron Intel Celeron still trying to "move" forward in terms of technology. In this dprosesor, intel was issued tioe taking the match FSB 100 MHz Pentium 3.
Sekarag about speed, speed Intel provides several options, ranging from 533MHz to 1.3 GHz. Of particular interest are cheaper than Pentium 2.
b. AMD Duron

Processor fib alias AMD Advanced Micro Devices has pin number 462 is arguably as much "play" for the same class with the Celeron. Lots of options for speed, ranging from Duron Duron 800MHz to 1200MHz. From the technology side, Duron 1200MHz version of its carrying amount 64kb L2 cache does not display the new technology. The processor technology used was 0.18 micron.
Performance itself is quite good, especially for standard applications. Supported with affordable price, this processor was chosen among entry level and game center. Create the home processor was chosen, its easy overclocking process.
c. Pentium 3

If you want a processor with affordable prices but has enough ability, Pentium 3 is still be glimpsed. In this processor, must be smart (carefully) in choosing. The first type is the EB which means that the processor has 265KB of L2 cache on-chip with a 133MHz bus. Type yanglain is Pentium 3 type E which means has a 256KB L2 cache on-chip bus Taoi has only 100MHz.
Pentium3 also has 3 versions based on the process technology, which is common now using 0.18 micron, while the new type diseut Tualatin using 0.13-micron process technology. For commercially available speed of a Pentium 3 733MHz to 1.2 GHz.
d. Pentium 4

Intel Pentium4 inilahyang entrusted create hegemony pentium3 replace the mainstream.
Willamete version that uses 0.18 micron process technology with 256KB L2 cache by Intel is divided into two based on the existing pin on the processor. For the initial release version of the Pentium4 processor, it uses 423 pin to "erhubungan" with the motherboard and other devices. Meanwhile, the latest Willamate been carrying pin 478. The processor uses 478 pin is already using 0.13 micron technology that has several advantages such as lower heat, can be carried L2 512KB more.
Willamate version with speeds ranging from 1.3 GHz to 2 GHz. Meanwhile, the new version provides a Northwood and speed options are 2GHz and 2.2 GHz. Because there are two versions of this, it is recommended that when buying, should know exactly which type to use.
e. AMD Athlon

At least two types of AMD Athlon processors on the market, Thunderbird and Palomino AthlonXP aka eXtreme Performance. If there is an early version that carries a 100MHz FSB and 133MHz, AthlonXP have to support 133MHz FSB sebebsar. For now, the Thunderbird on the market still wearing 900MHz speeds up to 1.4 MHz. Meanwhile, ranging from speed AthlonXP 1500 + to 2000 +.
The main advantage of this AMD processor is fabricated its satisfactory for the overlocker. Moreover, the price is relatively affordable, these processors are now the norm among home and small and medium corporates.
Now living depends on you, would select which type of processor. A definite choice of processors will greatly influence the choice of devices such as motherbord and heatsink fan.
3. motherboard

Which motherboard should I choose to assemble the PC really topnotch, the answer varies. Choosing a liking moteherboard is easy-easy job already. Now we are looking for a step yag's easy and we remove the already.
a. When will use pentium3 or Celeron, then choose a motherboard that has as many as 370 pin processor socket aka socket 370. Meanwhile, Athlon and Duron processors if you want to use, use a motherboard with socket A or socket 462. Another case when choosing pentium4, when using 0.18 micron architecture, then choose a motherboard Socket 423 pin PGA. As for the Pentium4 0.13 micron architecture, select mini BGA 478 pin socket.
b. For an Intel Pentium 3 or Celeron, choose a motherboard with Intel 815E chipset or 815EP, VIA Apollo Pro series, Ali Aladdin Pro series, and SiS 63x series. For AMD Athlon or Duron then the choice will fall on the motherboard with a VIA chipset series KT, Ali Magik 1, and Sis 73x. It would be nice if, before determining which chipset will be used, compare the performance of one shipset with another chipset.
c. Make sure the motherboard to be selected has support for Ultra ATA/100 hard drive interface and has support for the AGP port (Acceierated Graphic Port). We recommend that you choose a motherboard that supports SDRAM and DDRRAM.
d. Choose a motherboard that has features additional ports adequate. To install memory DIMMs place, other than DIMM sockets, PCI bus number owned motherboard should also be considered. Motherboard is selected should have an AGP port.
e. Look for a motherboard that provides support functions - integrated functions: graphics cards, sound cards, LAN, modem, and more. And also look for a motherboard that offers overclocking via BIOS.
4. memory

                                                 SDRAM                                                       DDRRAM

 

Quality of memory is usually seen from the highest operating frequency can be achieved by the memory, the SDRAM, it can be seen jelasm on chips located on the memory. In the body can be seen the numbers preceded by a minus sign (-), eg -7.5: -6, and so on. This sign is used as a guideline in determining the maximum frekuensikinerja memory. The general formula is f - 1000 / T, where f is the operating frequency (MHz), and R is the period of memory, the numbers written on the memory chip. Quality of physical memory can be seen from the brand of chips used.

5. Hard Drive

Identify the needs and specifications of smart-pandailah understand hard before choosing.

Consider choosing hard drive speed 7,200 rpm (revolution oer minute) or higher; faster Nikai rpm faster then semakain ability, should speed reading gap of 12 milisecont (ms), and transfer at least 15MB per second.

6. IDE cable

This cable is used to mengoneksikan motherboard with hard drives, optical drives, and floppy drives. Latest models bebentuk round, so more probe and not easy broken.

EQUIPMENT REQUIRED
The main equipment needed if you want to assemble a PC of course screwdriver. We recommend using 1 complete screwdriver set. But if not possible a screwdriver positive (+) good quality is relatively adequate. Try screwdriver contains a magnet on the end so it is easy to install small screws.
Other equipment that is needed is an implanted metal bracelet (grounded). This bracelet will be used hand to eliminate static electricity that is in hand.

Read More