How to drill CURTAIN OF GOOD AND TRUE

How to drill curtain RIGHT

Well here I will publish my experience in drilling curtain that rarely people know. Because people sometimes underestimate this kind of work.
As for the tools needed to do the drilling are:

a. A drill for the wall type of drill that I recommend is the type of bosch.

b. Drill bits for concrete that has eyes the size of five that I recommend.

c.Fiser with bolts that fit the size fiser F5 and worm screw size 5.

d. Screwdriver, pliers and a hammer if needed.
e. A gauge length of 5 meters

Well we will start to put up curtains properly in my experience.
1. First we measure the height of the curtain that we will attach a standard size that I usually have a high tide of 2.5 meters and width depending on the width nakonya.
  nako one standard size: 1 meter
  nako two standard sizes: 1.5 meters
  nako three standard sizes: 2 meters
  for 4 nako usually size 2.5
2. After we measured from the high mark fabric over 10 cm of the size of the fabric on the walls will we put the curtains earlier. The goal that was not too dragged when we plug that would later lead to the bottom of the cloth becomes dirty easily.
3. after we put a pair disilahkan drill we've provided before start of the drill bit mounted securely so that the drill can not be separated from the asat drill. Provide fiser and bolts that we do not inconvenience when drilling walls.
4. Attach the drill bit that has been fitted with drill ketanda we have made earlier.
5. valve drill press to rotate in accordance with our wishes. Press the drill earlier in accordance with the size of our fiser earlier. do not be too deep

Posted By Sameera Chathuranga

Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation test link ullamco laboris nisi ut aliquip ex ea commodo consequat contact me

Thank You